PLA Filament (plastic) for 3D printer STing3D Starlight 1kg, 1.75mm, Mercury

PLA filament STing3D Starlight 1.75 mm, 1 kg — color Mercury (metallic iridescence)

STing3D Starlight Mercury is a premium PLA with a striking metallic sheen (green-silver-graphite shades). Stable diameter and clean extrusion provide smooth walls without "bubbles" and nozzle clogging. Ideal for decor, figurines, cases, vases and prototypes where visual quality and clear details are important.

Advantages

• High precision 1.75 mm diameter (±0.02 mm) — uniform flow and minimal artifacts.
• Smooth feed - tangle-free winding, stable extrusion.
• A spectacular look is the silky metallic with a chameleon-like Mercury shimmer.
• Easy to print - low PLA shrinkage, less warping.
• Compatibility — FDM printers Bambu Lab, Creality, Elegoo, etc.

Printing recommendations

• Nozzle: 190–220 °C (start at 205 °C; adjust for speed/quality).
• Table: 40–65 °C (for large areas - 60–65 °C).
• Speed: 50–350 mm/s *
• Max Volumetric Speed: 9–12 mm³/s (depends on extruder).
• Cooling: 60–100% after the first coats for clear overhangs and shine.
• Finish: for the most “silky” effect, print with a layer of 0.12–0.20 mm, reducing the speed of the outer perimeters.

*Actual speed depends on printer model, nozzle, layer height, and model geometry.

Application

• Interior decor, vases, souvenirs and figurines with metallic sheen.
• Prototypes and body parts, demonstration samples, accessories.
• Gift models and collectible figurines with a "wow" effect.

Storage

• Keep the coil sealed with silica gel.
• If "shots" or roughness appear, dry for 3–6 hours at 45–50 °C.

Technical specifications

Conclusion

STing3D Starlight Mercury is a stylish chameleon PLA with stable geometry and trouble-free feeding. The choice for models that need to look "premium" right off the table.