PLA Filament (plastic) for 3D printer STing3D Starlight 1kg, 1.75mm, Comet

PLA filament STing3D Starlight 1.75 mm, 1 kg — Comet color (chameleon satin)

STing3D Starlight is a premium PLA with a silky sheen and a chameleon effect (blue-violet iridescence). Stable diameter, uniform winding and clean extrusion ensure smooth walls without bubbles and nozzle clogging. Suitable for decor, vases, figurines, cases and prototypes where visual quality and clear details are important.

Why is this convenient?

• High accuracy of 1.75 mm diameter ±0.02 mm - uniform flow and minimal artifacts.
• Smooth extrusion - no bubbles, no tangles, less risk of clogging.
• A spectacular look - silky shine and iridescence of the Comet color.
• Wide compatibility - Bambu Lab, Creality, Elegoo and other FDM printers.
• Easy to work with PLA — low shrinkage, less warping, simple print profiles.

Printing recommendations

• Nozzle: 190–220 °C (start at 205 °C, then adjust for speed/quality).
• Table: 40–65 °C (for large areas, closer to 60–65 °C).
• Speed: 50–350 mm/s *
• Max Volumetric Speed: 9–12 mm³/s (based on extruder capacity).
• Adhesion: Texture/PEI sheet, glue stick or light adhesive as needed.
• Cooling: 60–100% after the first coats for clear overhangs and shine.

*Actual speed varies by printer, nozzle, layer and geometry. For maximum quality, reduce speed and temperature.

Application

• Decor, vases, souvenirs with a "silk" finish.
• Prototypes of housings, accessories, lighting shades.
• Gifts and interior objects with iridescent color.

Storage

• Keep the coil in an airtight bag with silica gel.
• If "shots"/roughness appear, dry for 3–6 hours at 45–50 °C.

Technical specifications

Conclusion

STing3D Starlight Comet is a bright PLA with stable geometry and trouble-free feeding. Use it for models where smooth surfaces and a spectacular out-of-the-box look are important.